MyOlympus.org
The Photographic Community for Users of Olympus micro 4/3 digital cameras and E-series DSLRs
MyOlympus.orgPublic folders > David Peterson > Belle Isle Bridge

Belle Isle Bridge

Belle Isle Bridge
Copyright ©2009, David Peterson
Viewed times

The bridge at Belle Isle in Detroit MI.

Photographer: David Peterson
Folder: David Peterson
Uploaded: 04-Mar-2009 03:31 CET
Current Rating: 9.00/1
View all ratings
Delete my rating
Model release available:
Camera: Olympus E500
Exposure time: 1/30
Aperture: f22
Focal length: 60 mm
Lens: ZD 14-45mm
Focusing method: iESP P-AF
ISO: 100
White balance: Auto
Flash: no
Image format: RAW
Processing applied: Crop, Frame, Modified with Alfred's suggestions.
Various:
Image resized to: 534x800

Comment/Rate Share this Image

NO SUBJECT

Try rotating the image by 1 or 2 degrees counterclockwise. Cut off the bottom part with the ice, because it distracts from the main subject (the bridge). Increasing a bit the saturation and reducing the red content would also help. There is too much frame around the image (white, grey and violet frames).

Alfred Molon at 12:32 CET on 07-Mar-2009 [Reply]

Tried and Liked!

Alfred,
I tried each of your suggestions and I liked the results. Thank you for the excellent critique.

Alfred Molon wrote:
> Try rotating the image by 1 or 2 degrees counterclockwise. Cut off the bottom part with the
> ice, because it distracts from the main subject (the bridge). Increasing a bit the saturation
> and reducing the red content would also help. There is too much frame around the image (white,
> grey and violet frames).
>

David Peterson at 13:24 CET on 07-Mar-2009 [Reply]

What a difference!

Aha, now it looks so much better.

David Peterson wrote:
> Alfred,
> I tried each of your suggestions and I liked the results. Thank you for the excellent critique.
>
> Alfred Molon wrote:
> > Try rotating the image by 1 or 2 degrees counterclockwise. Cut off the bottom part with the
> > ice, because it distracts from the main subject (the bridge). Increasing a bit the saturation
> > and reducing the red content would also help. There is too much frame around the image (white,
> > grey and violet frames).
> >
>

Alfred Molon at 15:58 CET on 07-Mar-2009 [Reply]